UPDATED 11/20/2024
Water Connections
SIDE WATER INLET WITH BOSS
CAST IRON
$78.00 EACH
CAST IRON
$78.00 EACH
IRON CASTING
Has 1/2" NPT boss facing firewall and topside conduit bracket bolt hole.
This neatly designed part helps eliminate the rat's nest of tubes and wires used with temperature gauges and senders. If you've installed a hot water heater, here is
your 1st best choice to tap into hot water.
DOES NOT include hardware or gasket.
Has 1/2" NPT boss facing firewall and topside conduit bracket bolt hole.
This neatly designed part helps eliminate the rat's nest of tubes and wires used with temperature gauges and senders. If you've installed a hot water heater, here is
your 1st best choice to tap into hot water.
DOES NOT include hardware or gasket.
WATER PUMP ADAPTER-A
A to EARLY V-8 Pump
INSTOCK
$60.00
A to EARLY V-8 Pump
INSTOCK
$60.00
FORD "A" to early Ford V-8 3-stud/bolt water pump
Adapts Ford V-8, 1932-1936 water pump to
Ford Model A flatheads AND to Riley Two Port OHV conversions.
Maintains correct alignment of pulleys AND MORE STRENGTH.
NOTE: This adapter does NOT fit Model B water pumps.
Adapts Ford V-8, 1932-1936 water pump to
Ford Model A flatheads AND to Riley Two Port OHV conversions.
Maintains correct alignment of pulleys AND MORE STRENGTH.
NOTE: This adapter does NOT fit Model B water pumps.
WATER PUMP ADAPTER-B
FORD "B" (1932) to Ford V-8 Pump (1932-1936)
$90.00 IN STOCK
FORD "B" (1932) to Ford V-8 Pump (1932-1936)
$90.00 IN STOCK
Important fitment: This part fits all 1932-1934 Ford Model B cylinder heads used on Model A Fords or 1932Ford Model B cars. NOTE: the 1933-34 four-cylinder engine compartment set-ups differ, as the radiator leans back and reduces the space needed for a fan.
Fits all Model B heads (3 bolt/studs) to
early Ford V-8 (1932-1936) water pump adapter.
This adapter also fits the YAPP-Roof 101 Cyclone OHV
and several other OHV conversions
using the Model B Ford dimensions.
this adapterm maintains proper V-Belt alignment.
The 1932-36 V8 pump shown is not included.
Fan blade(s) can be mounted to the "snout" by making a "donut-spacer.
The pump can also be modified by machining a new shaft to Model A Ford dementions.
Contact us for instructions.
Fit to original pump is good.
Fit to repro pumps may require minor grinding for clearance.
Fits all Model B heads (3 bolt/studs) to
early Ford V-8 (1932-1936) water pump adapter.
This adapter also fits the YAPP-Roof 101 Cyclone OHV
and several other OHV conversions
using the Model B Ford dimensions.
this adapterm maintains proper V-Belt alignment.
The 1932-36 V8 pump shown is not included.
Fan blade(s) can be mounted to the "snout" by making a "donut-spacer.
The pump can also be modified by machining a new shaft to Model A Ford dementions.
Contact us for instructions.
Fit to original pump is good.
Fit to repro pumps may require minor grinding for clearance.
MODEL A FORD-FLAT HEAD
WATER BLOCK OFF
$20.00 IN STOCK
WATER BLOCK OFF
$20.00 IN STOCK
Water Outlet Cover Plate (shown on right)
Extra thick cast aluminum.
Won't crack under pressure.
Extra thick cast aluminum.
Won't crack under pressure.
"A" PUMP BLOCK OFF
FINNED PLATE
In Stock $45.95
FINNED PLATE
In Stock $45.95
Aluminum casting is Machined flat, drilled, counter-board and
ready to install with your gasket.
ready to install with your gasket.
Scalded Dog Speed Parts, 3860 Cain Run Rd, Batavia OH 45103, USA
(513) 724-9000. Email: [email protected]
(513) 724-9000. Email: [email protected]