UPDATED 9/9/2024
Plates & Medallions
LION UPPER SIDE PLATE
$65.00 IN STOCK - Very limited
Plate mounts between block and water inlet
Ready to attach - needs 2 inlet-gaskets (not supplied)
$65.00 IN STOCK - Very limited
Plate mounts between block and water inlet
Ready to attach - needs 2 inlet-gaskets (not supplied)
Side Valve Cover Plate-NO FINS-Model A
$95.00 IN STOCK -Limited
$95.00 IN STOCK -Limited
Cast Aluminum.
Stock appearance with a recess to add a name plate.
Has extra boss to drill and tap for oil and filter provisions.
Stock appearance with a recess to add a name plate.
Has extra boss to drill and tap for oil and filter provisions.
VALVE COVER - FINNED - A
$95.00 IN STOCK (AS-1)
$95.00 IN STOCK (AS-1)
Uses the LATE 1929 TO 1931 side oil return pipe (It's a bit longer).
This is an original flat-back* valve cover made from original wooden patterns.
* Fits Model A and Burtz blocks using head mounted ignitions.LOWER SIDE PLATE - Model A & B*
Driver's Side
$65.00 IN STOCK (AS-2)
Driver's Side
$65.00 IN STOCK (AS-2)
Cast Aluminum.
Fins match the valve cover plate above.
Comes with eye bolt hardware to install.
This is an original Finned Plate made from historical old wooden patterns.
* This plate will fit Model B engines if the Model A oil filler pipe is used.
Fins match the valve cover plate above.
Comes with eye bolt hardware to install.
This is an original Finned Plate made from historical old wooden patterns.
* This plate will fit Model B engines if the Model A oil filler pipe is used.
FUEL PUMP COVER - Model B
$25.00 IN STOCK
$25.00 IN STOCK
Just the plate . . .made from historical old wooden pattern.
Aluminum casting.
Aluminum casting.
Scalded Dog Speed Parts, 3860 Cain Run Rd, Batavia OH 45103.
Phone (513) 724-9000, Email: [email protected]
Phone (513) 724-9000, Email: [email protected]