Secrets Of Speed Society
Intake Manifolds
Updated 3-24-2017















​SCALDED DOG
 - Single Down Draft Intake Manifold                                        
$324.95                     IN STOCK
Fits Model A and B Fords.
High grade aluminum casting.
​Designed to bolt to the stock exhaust manifold.
Use any Ford V-8  three bolt carburetor.
The Stromberg 97 or Ford Holley 94 are best matched to the 200 ci Banger engine.
Fuel pump is not required as the float bowl is below the the fuel tank.
This manifold is best used with a phrenolic spacer (available in "gaskets") to keep the carburetor cool.

Model A's like hot VAPORIZED fuel . . . a heated intake manifold is PERFECT to vaporize the fuel . . . This is the manifold that works!









EQUALIZER Dual Down Draft Intake Manifold                  
OUT OF STOCK . . . .castings ordered

Fit Model A and B engines as well as Riley OHV conversions.
Uses any Ford V-8 1932-48 three bolt carburetor. Stromberg 81 and 97 recommended. Holley-Ford 94 and 92 also fit nicely. 
Our Equalizer manifolds have a centered fuel/air mixing plenum whereby all fuel is mixed equally before it is directed to the port runners. Special directional vanes, cast inside the down-draft carb mount, push the fuel mix to center.
This exclusive feature provides a group of possibilities: Two carbs can be used in tandem; two carbs can be used with progressive linkage; one carb can be used as the only functioning carb and the other is blocked off - this provides excellent carburetor for 200 ci engine.
​(Directional vanes can be machined out for professional racing, this extra machine work is not recommended for street)









The mounts are cast and machined as shown (oval) and designed for use with headers or OHV conversions.
The mount holes are machined as a dual-slot.
For header use, leave as oval and mount directly to your header plate.
The outboard larger hole is for stock mount stud/bolt holes.
The inboard smaller hole is for Riley Two Port OHV conversion.
To fit with a stock exhaust manifold requires some machine work.
The intake must be Machined to fit over stock exhaust manifold and to clear the side valve cover. AND the mount feet must be cut straight down through the middle of the four OUTER larger holes to make them like "crow's feet".











VORTEX Dual Up or Down Draft Intake Manifold                                    
$324.95                 IN STOCK
Accepting
fully paid pre-orders after January 1st 2017

Includes linkage, hardware and instruction.











Carburetors that fit: Zenith Model A and B, Tillotson and Marvel.

We recommend the Model B Zenith (shown) and the Tillotson carburetors.
They seem to work better in pairs than the Model A Ford Zenith.












Manifold - Special - single/dual/triple - Up or Down Draft
$165.00                                   IN STOCK
Unmachined sand cast aluminum. MAKE YOUR OWN MANIFOLD
Does NOT come with carb mounts - U-weld mounts sold separately.
NO NAME - NAME SPACE IS CAST BLANK

Carburetor mounts not included.
Machine work not available - Sold as is.
Questions? Please send an eamil.
Order: email with what you want along with your full name and billing/shipping address.
​We will send back an invoice to pay from. . . Or call our office (513) 724-0700 EST, USA
Scalded Dog Speed Parts, 3860 Cain  Run Rd, Batavia OH 45103, USA . Phone (513) 724-0700, EST.   cy4fn@outlook.com